8kphil

Active Member

• Dec 25, 2011

• #1

found a smallish hole in my chassis in the hole under my osf outrigger,anybody patched here before? any tips? do i need to remove the outrigger? or cut open and peel it back abit? any advice appreciated oh and i did search!

 

lucifus

Active Member

• Dec 25, 2011

• #2

A photo would be handy for someone to offer some advice. The size/location of the hole would make the difference. Have you given it a good prodding with a screwdrive to make sure its just a little hole and not something a lot worse?

 

top drive

Well-Known Member

• Dec 25, 2011

• #3

I knows where it is

You can hide it By welding in a little triangle to the outrigger and making it flush but your really going to have to take the outrigger off cut out the ****e and patch - when you take the outrigger off if the holes smaller than your fist ill eat my hat !

Hiding it will just be storing problems for another day !

 

8kphil

Active Member

• Dec 25, 2011

• #4

top drive said:

I knows where it is

You can hide it By welding in a little triangle to the outrigger and making it flush but your really going to have to take the outrigger off cut out the ****e and patch - when you take the outrigger off if the holes smaller than your fist ill eat my hat !

Hiding it will just be storing problems for another day !

Click to expand...

think im gonna cut the bottom of the outrigger off and then patch the chassis then re weld the bottom of the outrigger