pete12345

Well-Known Member

• Jul 31, 2018

• #1

hi replaced relay 7 today right side blower worked for two hrs now got no power to Hevac controls at all and nanocom saying can't connect to ecu help much needed now cheers

 

Datatek

Well-Known Member

• Jul 31, 2018

• #2

pete12345 said:

hi replaced relay 7 today right side blower worked for two hrs now got no power to Hevac controls at all and nanocom saying can't connect to ecu help much needed now cheers

Click to expand...

Fuse box. Take it apart and look for burnt connections, melted solder etc.

 

pete12345

Well-Known Member

• Jul 31, 2018

• #3

I had a feeling u were going to say that will strip it out then try post some pics but I don't do soldering maybe get someone to do it for me I've needed

 

simonlap

Member

• Jul 31, 2018

• #4

I had same last week, took relay board apart and then ordered a used one from ebay as the old one was obviously cooked. It came with a complete set of relays and fuses, all is good again with the blowers.

 

pete12345

Well-Known Member

• Jul 31, 2018

• #5

I may have to do the same

 

K

kds

Well-Known Member

• Jul 31, 2018

• #6

That looks a bit poorly, just make sure you get one with same part number , could wrong but think they vary a bit.

 

pete12345

Well-Known Member

• Jul 31, 2018

• #7

Yer was told that don’t fink this one is repairable then

 

brianp38dse

Well-Known Member

• Jul 31, 2018

• #8

Yes you do have to make sure it is the right part number as there are quite a few different boxes for diff years manual- auto and so on, new ones are available should you wish to go that route .

 

pete12345

Well-Known Member

• Jul 31, 2018

• #9

Yer do u know I’ve there’s anyone on here that repairs the old motherboard I’ve I put on a new one keep the old one for future

 

pete12345

Well-Known Member

• Jul 31, 2018

• #10

Also any idea where I will find the part number on the old one cheers

 

brianp38dse

Well-Known Member

• Jul 31, 2018

• #11

here`s a vid on repair

 

pete12345

Well-Known Member

• Jul 31, 2018

• #12

Cheers brian38 I will probably give it to my son he will try and solder it he's always messing with electronics

 

ukadamwest

Well-Known Member

• Aug 1, 2018

• #13

pete12345 said:

Yer do u know I’ve there’s anyone on here that repairs the old motherboard I’ve I put on a new one keep the old one for future

Click to expand...

Bike teacher dave.. he's in bromley area

 

pete12345

Well-Known Member

• Aug 2, 2018

• #14

Oh cheers will give him a pm when I sort the new one out

 

Datatek

Well-Known Member

• Aug 2, 2018

• #15

pete12345 said:

Oh cheers will give him a pm when I sort the new one out

Click to expand...

Looking at the heat damage to the circuit board, it will need sealing with a Conformal Coating after repair to stop it absorbing moisture.

 

pete12345

Well-Known Member

• Aug 2, 2018

• #16

See previous post I'm goin to see I've bikerteacher dave will av a look at after I get a new one and keep it for a spare

 

pete12345

Well-Known Member

• Aug 2, 2018

• #17

All I know is it's a good job I'm on holiday for 4 wks the jobs on the car just keep growing

 

pete12345

Well-Known Member

• Aug 2, 2018

• #18

Oh and now the plastic bonnet pull just ordered new one from island4x4 one of the plastic clips is broken on mine

 

Grrrrrr

Technician, Bodgit & Scarper Ltd

• Aug 2, 2018

• #19

pete12345 said:

Oh and now the plastic bonnet pull just ordered new one from island4x4 one of the plastic clips is broken on mine

Click to expand...

Mine broke last year. Missus denied everything. Cheap enough.

 

pete12345

Well-Known Member

• Aug 3, 2018

• #20

Got new one on order do they come with new spring do u know