you will still get air coming through all vents with just onr blower working. pull the pollen filters out and you can see the blowers spining through the hole, if youre not sure just tentativly put something like a length of bamboo in, it will catch the fins and you will soon know if its working.the blowers fail when the pollen filters dont get changed for a few years,
tony2
Active Member
Datatek,
Blowers can be controlled by Nanocom but not individually :suspicious:
Nanocom now reporting:-
L/H blower motor high side of regulation circuit fault (permanent).
Is the regulation circuit built into the motors or a seperate unit ?
Can't play at the moment as it's p*****g down.
Blowers can be controlled by Nanocom but not individually :suspicious:
Nanocom now reporting:-
L/H blower motor high side of regulation circuit fault (permanent).
Is the regulation circuit built into the motors or a seperate unit ?
Can't play at the moment as it's p*****g down.
Datatek
Well-Known Member
Sounds like the speed control has failed, possibly repairable if you are into electronics
before u buy a new one, hotwire the one you have just to make sure its knackered,the live is easy to spot its right on the end of the motor, just take the 3 or 4 screws out from inside the glovebox and you can see the motor is very accessable, lucky for you its the lh one
wil2813
Well-Known Member
tony 2, ive got one you can have for nothing if you can collect it.pm me for infoI assume the motor unit contains the control, so as I'm no electronics type, a second hand unit off Ebay will have to do......Cheers
