I,ve today replaced r/f unit and now car is dead,when try to start says engine imobilised press key fob but when do this just says engine disabled tried putting old one back on same thing, so now stuck, tried the sync- mate that shows all ok but same thing when try to start. any ideas anyone please.Help appreciated. i understood that to replace this unit it was just matter off disconect and replace with new one ?????.
Depending on year....
1995 to 1999 - put key in door lock turn to LOCK press the Lock Button, turn to UNLOCK and press the unlock button, open door and put key in ignition and start car...
1999 on - Put key in ignition....although mine is 1999, and I have to do the key in lock trick first...!!
1995 to 1999 - put key in door lock turn to LOCK press the Lock Button, turn to UNLOCK and press the unlock button, open door and put key in ignition and start car...
1999 on - Put key in ignition....although mine is 1999, and I have to do the key in lock trick first...!!
Chrisfrain2007
Active Member
And my 98 requires you to put the key in the ignition, as I found out when my son decided to play with my key
1995 to 1997 press lock/unlock button on fob,then within 30secs turn key in door lock.This key turn signals to Becm to accept the resync.
1997 on friendly resync.Simply insert key in ignition switch and resync is performed automatically.
Oops...got my years wrong!!
