pie eater pete

pie eater pete

Active Member
:(Morning all im stuck!

Got myself some nice Terrafirma shocks and spring to go on the Defender iv tried to follow the thread that Treworgey posted on here for stickin em on but now im stuck!

The offside turret bolt has rusted to nothing and cant get the bottom one undone as my Stillsons wont grip the old shock!

Any advice or even better a pair of helping hands would be much appreciated! A crate of your fave poison if that helps!:eek:

Cheers in desperation Pete!
 
Angle grinder? Try drilling through the shock and sticking a bar in it to stop it rotating - but have something to catch the oil from inside it.
 
I did the front shocks on a Defender a few weeks back and I ended up using an angle grinder. Got the top of the shock undone, removed the turret & spring and cut off the threaded part of the shock at the bottom. The nut and remainder of the threaded bit then just falls out of the bottom mount.
 
cheers for the quick replies gents im gonna try cutting through the spring first so i can get at it easier not sure iv got any steel bits so have to go shoppin!
 
Jesus Christ! What a pig of a job. Its taken me an hour and a half to cut the springs away and not even started on the shock yet!

I wont be trying anymore jobs i have neither the know-how or the knack!:(
 
just done the same to my m8s disco ,, and yeah it can be a pain in the backside but when ya done it all just stand back and take a look at the job well done :)
 
You must log in or register to reply here.

Similar threads

P3846HSE
P38 4.6 Shock Absorber mistake?
2
Replies
23
Views
2K
Mark Piercy
Mark Piercy
1988smithy
Help needed! Welder! *SORTED*
2
Replies
26
Views
3K
1988smithy
1988smithy
Jamiegreen
Disco 2 Complete ACE Renewal (With Pictures) - Ongoing
Replies
19
Views
9K
Alpinejim
A
Timmyt79
Passed First MOT in my ownership! Whoop Whoop!!
Replies
7
Views
1K
Timmyt79
Timmyt79
steve999
Articulation is it worth the effort?
2 3 4
Replies
76
Views
12K
MaxyMan
MaxyMan