Hi Guys,
I bought a really great 109 safari CSW during the summer with newish springs on the back (5 years old allmakes).
They looked a little sagged so I replaced them recently with bearmach springs.
When I put on the bearmachs it made no difference what so ever and still looks sagged...
I contacted LRseries and bearmach and they too are confused... bearmach have sent me new ones again to test (and I hope to do them tomorrow) but in the meantime can anyone give me advice?
Here is the car and the sagging rear suspension. Top of axle to chassis is approx 130mm on both sides and manual says it should be 160mm
Car has insulation and carpet in back, rear seats, transit engine and galved chassis. Other than the chassis and egine all is origional.
Springs are 279679 and 279678 and are on the correct side.
Thanks for any help
I bought a really great 109 safari CSW during the summer with newish springs on the back (5 years old allmakes).
They looked a little sagged so I replaced them recently with bearmach springs.
When I put on the bearmachs it made no difference what so ever and still looks sagged...
I contacted LRseries and bearmach and they too are confused... bearmach have sent me new ones again to test (and I hope to do them tomorrow) but in the meantime can anyone give me advice?
Here is the car and the sagging rear suspension. Top of axle to chassis is approx 130mm on both sides and manual says it should be 160mm

Car has insulation and carpet in back, rear seats, transit engine and galved chassis. Other than the chassis and egine all is origional.
Springs are 279679 and 279678 and are on the correct side.
Thanks for any help