Hi,
I have a 3.5 v8 in my 110 that is currently going through a complete nut and bolt restoration. Engine now in new chassis and local guy setup timing etc. Starts and sounds fine.
Idle fine.
Rev the engine and lots of blue smoke.
The engine was taken out in October last year and has been outside all winter (covered). It was smoking a bit when I got it but apparently the timing was out and the guy I got it from said the distrib was loose amongst other things. But not sure it smoked that much.
It is a carb model with a dirty great eldebrook on it (which I am told should come off at some point for off roading).
Is the smoke something that will clear in time due to it sitting around for so long?
Is something stuck? Been told to start get hot, let cool down and repeat a few times??
Should I take apart and could it be something accessable I can do? or
Sent it away?
Get a new one?
Any suggestions will be greatfully recvd.
I have a 3.5 v8 in my 110 that is currently going through a complete nut and bolt restoration. Engine now in new chassis and local guy setup timing etc. Starts and sounds fine.
Idle fine.
Rev the engine and lots of blue smoke.
The engine was taken out in October last year and has been outside all winter (covered). It was smoking a bit when I got it but apparently the timing was out and the guy I got it from said the distrib was loose amongst other things. But not sure it smoked that much.
It is a carb model with a dirty great eldebrook on it (which I am told should come off at some point for off roading).
Is the smoke something that will clear in time due to it sitting around for so long?
Is something stuck? Been told to start get hot, let cool down and repeat a few times??
Should I take apart and could it be something accessable I can do? or
Sent it away?
Get a new one?
Any suggestions will be greatfully recvd.