huddy229 said:

Hi everyone,

I fit a small digi thermometer today in the gap in front of the courtesy light, I fed the wire out towards the window screen inside the roof lining, across to the left, and popped the sensor out under the rubber door seal. Now, when I unlock my disco, no lights turn on automatically? But they come on when I change it to automatic? Can anyone shed some light, could I have disturbed a sensor somewhere?

Thanks guys,

Click to expand...

ratty said:

check the door pin (plastic spring loaded button) in the door shut.

Click to expand...

biggeeeee said:

From his profile he's got a disco II, if so its not got the door buttons

Click to expand...

ratty said:

Bugger.

I was assuming it was a D1.

Click to expand...

huddy229 said:

Sorry lads, biggeeeee is correct disco II I had to cut the headlining behind the plastic trim to push the wire through, is there anything up there I could of cut?

Click to expand...

ratty said:

have you checked the wires to the light?

Click to expand...

huddy229 said:

The light turns on when I flick the switch, it's just as I open the door/ unlock the car, nothing happens

Click to expand...

ratty said:

Wrong answer.

Have you checked the wires on the light.

Click to expand...

huddy229 said:

No drama, turned the ignition on, and back off and it seems to be working now! Thanks for the help

Click to expand...

huddy229 said:

Hi everyone,

I fit a small digi thermometer today in the gap in front of the courtesy light, I fed the wire out towards the window screen inside the roof lining, across to the left, and popped the sensor out under the rubber door seal. Now, when I unlock my disco, no lights turn on automatically? But they come on when I change it to automatic? Can anyone shed some light, could I have disturbed a sensor somewhere?

Thanks guys,

Click to expand...