thebiglad
Well-Known Member
Ok, the first thing to do is check to see if there is enough fluid in the ACE header tank in the engine bay. If you need to top it up you will ned to get 1 ltr of ACE low temp fluid available from all good Land Rover outlets.
Cheers
Dave
If you happen to be at the north end of county durham towards newcastle, you're welcome to pop up and i'll tell you what Nanocom says is wrong with it.
But yeah, do what Dave says and check it isnt something simple to spot but potentially expensive to fix like a fluid leak first.
David
But yeah, do what Dave says and check it isnt something simple to spot but potentially expensive to fix like a fluid leak first.
David
sierrafery
Well-Known Member
.....and the ACE fuse and relay in the engine bay(F15>15A, R14). The best thing is to plug in a tester....if no fault code then it's a bad contact somewhere(especially within the engine compartnment fusebox or multiplugs)
battenberg
Well-Known Member
where is the leak? in the pipework?
the hyro motor pumps out about 200bar, and will empty the resevoir in seconds through a 1/2mm dia hole!
