steve's P38 RR

Active Member

• Jul 4, 2009

• #1

Hi took my car to my local LR specialists to get the EAS fault code's read and there it would work he checked the fuse and relay but there ok, could it be a ECU fault,

I've got the hieght light's up and max 35 mph up on the dash, it did come and go but now on all the time, thought it mite be a hieght sensor but with out being able to read the faults i don't know.

Now going out to check the connections on everything.

cheers steve.

 

Irishrover

Well-Known Member

• Jul 4, 2009

• #2

Could be caused by dirty contacts at the OBDII socket, or at the. plug on the diagnostics lead.
I have come accross this problem several times and that was the culprit.

 

Datatek

Well-Known Member

• Jul 4, 2009

• #3

Height sensor connector full of water caused mine to light up all the lights on the height indicator and shortly after the 35mph max message and onto the bump stops.

 

kooky_guy

Well-Known Member

• Jul 4, 2009

• #4

steve's P38 RR said:

Hi took my car to my local LR specialists to get the EAS fault code's read and there it would work he checked the fuse and relay but there ok, could it be a ECU fault,

I've got the hieght light's up and max 35 mph up on the dash, it did come and go but now on all the time, thought it mite be a hieght sensor but with out being able to read the faults i don't know.

Now going out to check the connections on everything.

cheers steve.

Click to expand...

Might be worth getting yourself a lead from ebay and download the free software. That way you can read and clear the faults yourself next time it happens.

Rangerovers.net is an excellent source of information for the air suspension. I put a link to the right page somewhere in another recent posting.

Guy

 

V

Victor Lampart

New Member

• Jul 8, 2009

• #5

Hi there,
Its probably the OBD socket corroded away,had same problem,the pins in the socket rot away,got new socket and rewired it one at a time, works perfect now.
Regards Vic

 

gemsdad

NOT BOTHERED.

• Jul 8, 2009

• #6

hi,my obd socket also was corroded,this caused a problem as i could not connect a rovacom to reset the eas settings.