Les996

Member

• Mar 22, 2018

• #1

Hi All,

Ball joint has gone so need to change arm. It is on a series 3 but lots of changes...when I bought many years ago I was told they fitted a defender unit but not so sure as cannot get a match on it!

Any help really appreciated

...and thanks in advance!

Les

 

H

Hicap phill

Well-Known Member

• Mar 22, 2018

• #2

Early none pas 90 steering box.

What drop arm are you looking at using?

 

Les996

Member

• Mar 22, 2018

• #3

Thanks for that Hicap, I was just going to replace old drop arm - buy from paddock, but they didn't know what the box was and which arm to offer

 

H

Hicap phill

Well-Known Member

• Mar 22, 2018

• #4

Mine on my 110 is a later one that takes a track rod. Easier to replace than that ball joint. Unsure of the cost or part number.
Think all the bottom splines are the same.
Think it is off a later 300tdi disco
No steering damper on it

 

neilly

Well-Known Member

• Mar 22, 2018

• #5

Les996 said:

Thanks for that Hicap, I was just going to replace old drop arm - buy from paddock, but they didn't know what the box was and which arm to offer

Click to expand...

Hope you have some good tools to remove the drop arm, they can be very tight, why not just replace the ball joint? or am I missing something?

Cheers

 

Les996

Member

• Mar 22, 2018

• #6

Hi Neilly, just assumed it could have a fair bit of wear but yes would be easier as it is only the ball joint. Does the socket not tend to wear?

 

neilly

Well-Known Member

• Mar 22, 2018

• #7

Les996 said:

Hi Neilly, just assumed it could have a fair bit of wear but yes would be easier as it is only the ball joint. Does the socket not tend to wear?

Click to expand...

Not sure what yours is like, but mine had bearing cups in it for the ball joint to sit in, this all comes as part of a kit, but I do not know if yours is the same as mine, easy enough to pop out and check if you have the correct tools.

Maybe if you state your localish area someone may have one for you to use.

Cheers

 

Les996

Member

• Mar 22, 2018

• #8

Thanks again neilly, have just looked on youtube and looks pretty straightforward (final words lol)
Just spoke to Paddock and they can't supply without me saying if 3 4 or 6 bolt, I assume it is a 4 bolt?

Cheers