schwindj67
New Member
Hello all,
I am having an issue I need some assistance with. I recently purchased and 02 Freelander used. The onl issue it had when I purchsed it was the thermostst didn't work, so I replaced it and now I am having all kinds of issues. Upon inital start up it is very rough it will iddle to 200 RPM then die. If I keep my foot n the gas for a few minutes I can get it to idle fine. once it is warmed up it drives perfectly fine but I keep getting the following codes.
P1471, P1473, P1477 which all say Manufacturer Control Auxiliary Emission Controls, P1155 Manfacturer Control Fuel Air Metering, I also get the System to Lean Bank 1 which I have replaced, Systwm to Lean Bank 2 which I have replaced and Misfire cylinder 5 which I have replaced all 6 plugs and wires and the Clinder 5 Coil Pack.
Can anyone gine me some help here. The closest Rover Dealer is 4 hours away.
I am having an issue I need some assistance with. I recently purchased and 02 Freelander used. The onl issue it had when I purchsed it was the thermostst didn't work, so I replaced it and now I am having all kinds of issues. Upon inital start up it is very rough it will iddle to 200 RPM then die. If I keep my foot n the gas for a few minutes I can get it to idle fine. once it is warmed up it drives perfectly fine but I keep getting the following codes.
P1471, P1473, P1477 which all say Manufacturer Control Auxiliary Emission Controls, P1155 Manfacturer Control Fuel Air Metering, I also get the System to Lean Bank 1 which I have replaced, Systwm to Lean Bank 2 which I have replaced and Misfire cylinder 5 which I have replaced all 6 plugs and wires and the Clinder 5 Coil Pack.
Can anyone gine me some help here. The closest Rover Dealer is 4 hours away.