Hello Fellow P38ers,
The rear wiper arm on me '96 2.5DSE has just decided to go limp and has droped down vertically!!....apart from a few viagra in the wash water....any suggestions to what may be wrong....and more importantly...how can I put it right?

All suggestions gratefully awaited!

Cheers fellas!

Push the arm back up to it's normal rest position and tighten the nut under the cap on the arm where it goes onto the motor shaft.

Merci Datatek!....It's working fine now! Silly me....I should have realised that the arm had worked loose on the splines!!:doh:....But since I've been a P38 owner, I just naturally assume something is far worse than what it actually is....which it usually is!

Merci Beaucoup!