Sirus
Your all Banned except me
Funny as fcuk, but feel old as fcuk remembering that!
Heating controls
hey
i have a problem with my heat in my p38
i have only real heat in the right site an only real blow in the right site .
what can be wrong ??
Hav yew triyd setttin ther tempracha? :behindsofa:
it is on HI in both site
Datatek
Well-Known Member
There are hundreds of threads on blend motor problems, do a search or look at rangerovers.net.
magictiny
New Member
hey guys
i thing my brain will have a melt down in a short wile
i have taken the blend motor out an taken it apart . no broken gear teeth and the motor work ......
but i cant adjust it when i put the temp op or down
what is wrong ???? any ideas
You really need a Faultmate, so that the HEVAC can tell you which part is not working, there are a couple of sensors in there too that I didn't realise existed when I did mine.
magictiny
New Member
OK - plugged it in now, apparently it is the clutch on the compressor stuck open - well that is OK cos I have a leaky valve on the air con that needs replacing...
Interesting that the HVAC needs air con when it sees that it is below 3c
Fault. 'Compressor open circuit', means either there is low pressure in system or pressure switch has failed. System will not allow compressor to run without sufficient gas pressure.
Datatek
Well-Known Member
Aircon is a great dehumidifier, maybe that is why the system calls it?
there wase as some know no belt on the compressor 
i found out yesterday..
i have renovated the blend motor wit a new potmeter to 1£
and it works great
her is the type that fits
BI TECHNOLOGIES/TT ELECTRONICS|39PLABR10KLF30|POT, TRIM, 10KOHM, 1 TURN, 30 | Farnell United Kingdom
i found out yesterday..i have renovated the blend motor wit a new potmeter to 1£
and it works great
her is the type that fits
BI TECHNOLOGIES/TT ELECTRONICS|39PLABR10KLF30|POT, TRIM, 10KOHM, 1 TURN, 30 | Farnell United Kingdom
Datatek
Well-Known Member
today i put the belt back on and the dam thing works
Nice one, use it often to keep it in good order
