THEengineer

whatever

• Mar 14, 2015

• #1

strange got normal indicators but my hazards are not working,if i put the hazards on indicators stop and nothing happens dodgy switch maybe

 

muckmuck

Active Member

• Mar 14, 2015

• #2

I had similar issue and replaced hazzard switch and all returned to normal.

 

THEengineer

whatever

• Mar 14, 2015

• #3

muckmuck said:

I had similar issue and replaced hazzard switch and all returned to normal.

Click to expand...

will give that a go

 

top drive

Well-Known Member

• Mar 14, 2015

• #4

What age , pre 94 have separate fuses for indicator and hazards,

 

warrior

Well-Known Member

• Mar 14, 2015

• #5

My 94 defender did this, flicked the hazard switch a load if times and all is ok now, my 1st defender I fit a cheepo switch and all hell broke loose all kinds of things happened, buy a genuine one

 

THEengineer

whatever

• Mar 15, 2015

• #6

top drive said:

what age , pre 94 have separate fuses for indicator and hazards,

Click to expand...

96

 

G

GATSO

Well-Known Member

• Mar 15, 2015

• #7

Spray has switch with wd40 then press repeatedly should sort it temporally till u can get a fresh unit [emoji106][emoji383]

 

Tripp

Active Member

• Mar 15, 2015

• #8

The hazard switch is pretty cheap on ebay, might be easiest to change it rather than try to fix the switch

 

Landyfox

Well-Known Member

• Mar 15, 2015

• #9

I had the exact same problem mate. It's a dead easy fix, you simply strip the switch down and clean the contacts and hey presto it will work. These switches get full of crap and affect the copper contacts. There's a guide on the interweb, but it's really simple and quick. I replaced my bulb at the same time.!!

 

nobber

Well-Known Member

• Mar 15, 2015

• #10

Buy some switch cleaner and do the job properly.

 

THEengineer

whatever

• Mar 20, 2015

• #11

cheers guys will try cleaning it

 

THEengineer

whatever

• Mar 22, 2015

• #12

found the fault,a fuse had melted in the fusebox,somebody's powered the radio off the hazard circuit,because the indicators were working i though the hazards were on the same circuit