Galen

New Member

• Jul 12, 2009

• #1

I greased my propshafts today and I ended up with more grease oozing out from the end of the coupler than went into the shafts.

Does anyone have a recommendation for a coupler that doesn't leak too much?

 

Jackual_NZ

New Member

• Jul 12, 2009

• #2

Tecalemit make good grease guns and fittings, i have a Groz gun tho, it has a cartridge fill, so no mess when filling, real good nozzle that grips the nipple, Around 10-15 quid on ebay.

 

90truckcab

Well-Known Member

• Jul 12, 2009

• #3

i use a clarke compressed air grease gun , bout £22, great fer props etc, especialy if ther hard to reach !

 

Last edited: Jul 12, 2009

Galen

New Member

• Jul 12, 2009

• #4

I have a JCB cartridge gun, and that itself is fine. It's just the coupling that seems to be rubbish.
It holds the nipple quite well, but fails to seal properly and so the grease oozes out from the connector.

 

90truckcab

Well-Known Member

• Jul 12, 2009

• #5

Galen said:

I have a JCB cartridge gun, and that itself is fine. It's just the coupling that seems to be rubbish.
It holds the nipple quite well, but fails to seal properly and so the grease oozes out from the connector.

Click to expand...

call in yer local machine mart , halfords , screwfix etc and get a new tip easy as that , perhaps its been bent out of shape some time,