lanny90

Member

• Mar 26, 2012

• #1

Any advise plz changed slave cylinder, master cylinder, bled and no air in line also changed complete clutch, all forward gears ok but crunches into reverse, any help appreciated,
Cheers

 

GINGE

Greenlane liker, bobble hat hater

Events Planner

• Mar 26, 2012

• #2

If its only happening in reverse id be looking at the gearbox for the problem. Particularly the reverse gear.

what engine and gearbox is it? someone who knows alot more than me will be along shortly.

 

Soloby Rob

Banned

• Mar 26, 2012

• #3

Try engaging a forward gear then go straight into reverse, if it goes in without a crunch it could mean several things, wrong grade of oil in box causing drag, idle speed too high, oil on clutch plate again causing drag.

 

lanny90

Member

• Mar 26, 2012

• #4

BIG_GINGA_BEARD said:

If its only happening in reverse id be looking at the gearbox for the problem. Particularly the reverse gear.

what engine and gearbox is it? someone who knows alot more than me will be along shortly.

Click to expand...

hi its a lt77 box with a 200tdi disco lump

 

lanny90

Member

• Mar 26, 2012

• #5

Soloby Rob said:

Try engaging a forward gear then go straight into reverse, if it goes in without a crunch it could mean several things, wrong grade of oil in box causing drag, idle speed too high, oil on clutch plate again causing drag.

Click to expand...

hi tryed that as well still goes in with a crunch

 

lanny90

Member

• Mar 27, 2012

• #6

Thanks for response , removed gearbox, refitted clutch, re bled system, and now seems ok, so some fault of ours but mindboggled us.

 

jamesmartin

Well-Known Member

• Mar 27, 2012

• #7

as rob said your clutch was dragging ,the reverse is a sliding idler gear on the lt77 and doesnt have baulk rings like r380 so clutch drag will cause symptoms as you had