MJI

Well-Known Member

• Nov 8, 2014

• #1

Are the auto gearbox selector switches on the TD5 the same as the V8s as I need one and £150 for a S/H switch is taking the ****.

 

X

xat44

Active Member

• Nov 8, 2014

• #2

cant answer your question. but this may help.

Rebuild D2 ZF Selector Switch UHB100190 - Australian Land Rover Owners

 

D

Dafman1990

New Member

• Nov 8, 2014

• #3

Hi, yes they are took one off a v8 for my Td5 and all working fine since

Sam

 

MJI

Well-Known Member

• Nov 9, 2014

• #4

Does anyone have a scrap one I could play with?

 

D

Dafman1990

New Member

• Nov 9, 2014

• #5

I'll have a look see if I've still got my old one, we have wen them apart and cleaned the contacts etc at work before but they do t last long before they're gone again in my experience, mine worked with no m and s lights but wouldn't reverse

Sam

 

MJI

Well-Known Member

• Nov 9, 2014

• #6

Dafman1990 said:

I'll have a look see if I've still got my old one, we have wen them apart and cleaned the contacts etc at work before but they do t last long before they're gone again in my experience, mine worked with no m and s lights but wouldn't reverse

Sam

Click to expand...

I am not bad with electrics and electronics, I converted a VCR to NICAM, I repair keyfobs, basically happy to play with anything from SMD to mains.

So happy to give it a go and see what can be done

 

D

Dafman1990

New Member

• Nov 9, 2014

• #7

I'll have a look at work tomorow see if it's still there if so your welcome to it, just a thought, the p38 uses the same switch with a different plug, has anyone tried swapping the plug to a disco type? As they're around £40 SH

 

MJI

Well-Known Member

• Nov 9, 2014

• #8

Dafman1990 said:

I'll have a look at work tomorow see if it's still there if so your welcome to it, just a thought, the p38 uses the same switch with a different plug, has anyone tried swapping the plug to a disco type? As they're around £40 SH

Click to expand...

If I have the parts I could swap them over.

I like dining room projects (near PC and a socket for my soldering iron)

 

thebiglad

Well-Known Member

• Nov 10, 2014

• #9

Dafman1990 said:

I'll have a look at work tomorow see if it's still there if so your welcome to it, just a thought, the p38 uses the same switch with a different plug, has anyone tried swapping the plug to a disco type? As they're around £40 SH

Click to expand...

That's an enormous difference !!!!! Are you sure about that? Swapping the plug of the existing faulty one should take any effort at all.


Dave