roule
Active Member
The fuel pump doesn't work . I checked:
- the main and fuel pump relay ok
- inertia switch ok
- fuel pump 3 pins connector : 5 volts on the blue wire (gauge) OK , O volt on the green one...
- fuel pump relay socket (blue one) : I have 12 volts on the pin 30 and 86 but nothing on the 87 pin even when i bridge 85 and 86 ??
- no voltage on the C40 fuse circuit on the main board (fuse is good)
- no voltage on the coil (+ battery and - coil pin) - condenser seems ok.
Don't know what to check after ... and what to replace battery (old one) , coil ...
- the main and fuel pump relay ok
- inertia switch ok
- fuel pump 3 pins connector : 5 volts on the blue wire (gauge) OK , O volt on the green one...
- fuel pump relay socket (blue one) : I have 12 volts on the pin 30 and 86 but nothing on the 87 pin even when i bridge 85 and 86 ??
- no voltage on the C40 fuse circuit on the main board (fuse is good)
- no voltage on the coil (+ battery and - coil pin) - condenser seems ok.
Don't know what to check after ... and what to replace battery (old one) , coil ...
