baggyjim

New Member

• May 11, 2008

• #1

hi all anyone got a good source for fuel pipes etc, putting 3.5 carb into 90 got new fuel tank and internal pump just need bits to connect together inline filter and vapour watsit

 

D

discomania

Well-Known Member

• May 11, 2008

• #2

String will work, it takes a while to soak up the fuel from the tank all the way to the carb but it does work... Not recommended for high speeds though.

 

S

slob

Well-Known Member

• May 12, 2008

• #3

how much do yer need and what dia?

 

muddythelandy

New Member

• May 12, 2008

• #4

I've got loads of nylon 10mm od 8mm id fuel line in fetching shades of green or yella... bought 30m of each and used about 6

 

Dez

New Member

• May 12, 2008

• #5

10mm copper from a plumbers merchants the adapt the ends with rubber fuel lines

 

muddythelandy

New Member

• May 12, 2008

• #6

Dez said:

10mm copper from a plumbers merchants the adapt the ends with rubber fuel lines

Click to expand...

aye a pal did that too - worked well.

 

baggyjim

New Member

• May 12, 2008

• #7

copper pipe sounds good as a gas fitter by trade got few miles of the stuff around just need to find rubbery bits ta