after having a look through the site found out some info on running just on rear prop due to removal of front prop as uj goosed ! i removed it put landy in diff lock high and nothing just the coupling for the front prop spinning no drive to rear ? Any ideas what problem could be ? thanks
jamesmartin
Well-Known Member
your not in difflock ,either linkage to loose or not adjusted right or switch wound in too far jamming diff lock selector
What jamesmartin said.
Definitely not in diff lock.
Get under the disco and look at the transfer box, on top of the TF box just above the front prop output is the diff lock selector.
Get somebody to sit in the car and move the lever while your underneath. You will be able to see if the selector is actually moving.
See what happens and let me know what you see....I can guide you once you tell me what's happening.
Definitely not in diff lock.
Get under the disco and look at the transfer box, on top of the TF box just above the front prop output is the diff lock selector.
Get somebody to sit in the car and move the lever while your underneath. You will be able to see if the selector is actually moving.
See what happens and let me know what you see....I can guide you once you tell me what's happening.
jamesmartin
Well-Known Member
if you look underneathe on top of front output housing on transfer box ,where the vertical diff lock linkage is secured to t/box turn with 13mm spanner clockwise as looking down on it that will put it into diff lock ,later you will need to remove consol ,gaiter etc to get to the top of gear box and sort lever from there
