L

lamonm

New Member

• Jun 23, 2014

• #1

afternoon all

The front offside fog lamp on my recently acquired '05 Freelander seems to be set in correctly.

it looks like the reflective cone inside has moved & the bumper on the out side has a very small scuff mark. ( my guess it a bird strike or something has done the damage )

The question & less of my theories - can anyone please advise if I can get into the lamp to re-adjust the cone? if so how?

Many thanks Mal

 

Freelaner

Landy Driver

• Jun 23, 2014

• #2

they adjust from the back

 

L

lamonm

New Member

• Jun 23, 2014

• #3

cheers for that, so does that mean I remove the whole lamp from the front of the car by removing the plastic surround to get to the back?

 

Freelaner

Landy Driver

• Jun 23, 2014

• #4

you should be able to access it in situ by getting to the rear of it.
you may need to unscrew the plastic valance

 

L

lamonm

New Member

• Jun 23, 2014

• #5

sweet - will get in & have a look tonight. cheers

 

hd3

Well-Known Member

Full Member

• Jun 23, 2014

• #6

when you prise the plastic surrounds off
do so from the vehicle 'outside' ..
as towards the centre ( grill-side ) there's a plastic tab that can be accidently broken
as i found out :-/ .. though .. superglue rescued it

'n have a torch handy .. as the clips can dislodge and fall inside the bumper

 

Last edited: Jun 23, 2014

L

lamonm

New Member

• Jun 24, 2014

• #7

job done & all aligned up correctly

cheers guys