THE BUDDAH

THE BUDDAH

New Member
Hello,

I would like to renew the seal thar goes between the rear of the front diff and the part that the front prop bolts onto.... while the axle is off.

Don't know what it is called.
My manual does not show how to do it and i can't find it in the search bar.

If i could be pointed in the direction of a thread that shows how to change the seal and what tools are needed that would be fantastic.

Is it a hard task?
Should i renew the rear as this axle is also off?

Thank you for helping in this matter.
 
That will be a Pinion oil seal, it's not a hard task and it's up to u in replacing the rear one, is it leaking?
 
THE BUDDAH said:
How do you do it?
what tools?

while the axles are off, might as well have a go.
Click to expand...

if the axle is off and the diff is still in the axle casing, then either make up a flat bar with a couple of holes in it that you can bolt through the flange to, to stop it rotating or maybe get some big stilsons on the flange across the flats so it cant spin, do you have access to airtools or a leccy impact nut spinner?
 
Thank you for replies,

I've saved the video and made a note of ideas, first thing to do is check me tool box.
 
You must log in or register to reply here.

Similar threads

ar1g3
P38A Front diff pinion wobble?
Replies
16
Views
931
FEI
FEI
R
Disco 2 Centre diff lock
Replies
9
Views
612
sierrafery
sierrafery
H
Diso1 Diff lock how it works
2
Replies
21
Views
2K
marjon
marjon
M
How far to push half shafts into diff?
Replies
2
Views
568
mcbrl
M
mad85
Disco 2 3.5 vs 3.54 diff ratios
Replies
11
Views
1K
mad85
mad85