LAMPRO

Active Member
had too remove front bearing hub passenger side as the thing was knackered, when removed found that the front axle was knackered how do you refit as the thing is out already as it pulled out with the hub
 
I pulled hub away too replace it and the stub axle came out with it as the splines had welded them selves on tight its the long one passenger side
 
do you mean cv pulled out with hub ,they often need knocking through with brass drift or similar after nuts removed
 
yeh that's it the cv boot joint and complete bar came out, how easy is it too put back in im picking up a replacement tomorrow
 
its that easy **** myself when it pulled out lol thought here we go again. Will keep you posted on how I get on, just seems like all the parts on this car were the original factory fitted parts, slowly getting through on replacements cheers buddy
 
Phew! Getting all of a tizzy over terminology for a second when you said front axle...

Yes, as james says the driveshaft (halfshaft) and cv joint will go back in although it takes a bit of gentle jiggling sometimes. ;)
 

Similar threads