Spacemonkey... said:

Not that difficult at all. The hardest part IIRC was getting one into position. I think it's easiest to have all 3 loose to do this, but I know Haynes Book Of Lies goes on about diff alignment, but when people replace the diff entirely, do they bother? I never have...

You can buy them made from orange polybush. Should be ok in this application I'd have thought and shouldn't need doing again then.

Click to expand...

Freelaner said:

if you can drive over to mine one weekend (sheffield) i'll show you how to do it

Click to expand...

darren712 said:

yeah might just do that one weekend thank you

Click to expand...

darren712 said:

I need to do a long journey on sunday and a friend said just take propshaft of till I get it sorted will it still run and do I need to take all propshaft of or just front bit or back bit...

cheers
darren

Click to expand...