andde
Member
i asked them, but no
That support is for 3 doors and yours is 5 is not it? I looked for it and didn't find it. If it helps, I made a measurement and much stiffer... Good luck.
https://www.landyzone.co.uk/land-ro...freelander-today.199594/page-546#post-5015141
https://www.landyzone.co.uk/land-ro...freelander-today.199594/page-546#post-5015141
andde
Member
Nice work. I have a 3doors FL, and already have the rear parcel shelf, i'm just missing the trim for fixing it.
https://www.scuderiacarparts.com/part/965034/landrover/stc50372puy/kit-fixing-parts.html
Probably find they don't have any but doesn't hurt to ask.
Also I have seen 3d printed versions of these knocking about.....if you have a printer.....or a friend with one.
Probably find they don't have any but doesn't hurt to ask.
Also I have seen 3d printed versions of these knocking about.....if you have a printer.....or a friend with one.
andde
Member
Thanks, i asked them and emailed me saying that ref isnt available anymore.
The ref is : STC50372PUY, you can see here https://parts.jaguarlandroverclassic.com/stc50372puy-kit-fixings.html
About the 3d printed versions, do you mind to share plans if you have ?
Nodge68
Well-Known Member
Wow, someone is making some money on those.
https://cults3d.com/en/3d-model/various/support-plage-arriere
Although this looks chargeable, there may be other free ones out there
Although this looks chargeable, there may be other free ones out there
Wow, someone is making some money on those.
They don’t look that good a finish either. But to be fair, they probably do take the best part of a day to print. And I ‘pose it does solve the issue.
