Epicuser

Ex Freelander Owner

• Oct 27, 2013

• #1

This is a long shot, but I retrofitted a flappy paddle multi-function steering wheel to my previous Yeti.

I really miss them.

Do you think that it would be possible to retrofit some to an FL1?

Maybe fit an Evoke steering wheel.

 

bukko

Well-Known Member

Full Member

• Oct 27, 2013

• #2

If you can figure out out the steptronic shift works, and if it's just electronic switching, you can probably adapt for flappy paddles I would have thought.

 

edwardcraney2012

Active Member

• Oct 27, 2013

• #3

Sounds technical but not impossible, I've not had anything to do with the autos but would love to see something like this done

 

edwardcraney2012

Active Member

• Oct 27, 2013

• #4

Looking at this diagram you could maybes patch into the steptronic switch, I dunno if it'll work as a normal open/shut switch or a voltage modifying switch, would try it on a scrapper first in case it upsets something.

 

Attachments

• 
  circuit76.jpg

  74.9 KB · Views: 220

Epicuser

Ex Freelander Owner

• Oct 28, 2013

• #5

edwardcraney2012 said:

Looking at this diagram you could maybes patch into the steptronic switch, I dunno if it'll work as a normal open/shut switch or a voltage modifying switch, would try it on a scrapper first in case it upsets something.

Click to expand...

Thanks. This is looking beyond my electrical abilities.

I wonder if the Evoke MFSW will even fit to the steering column in my '06 FL1....

 

edwardcraney2012

Active Member

• Oct 28, 2013

• #6

Epicuser said:

Thanks. This is looking beyond my electrical abilities.

I wonder if the Evoke MFSW will even fit to the steering column in my '06 FL1....

Click to expand...

Owts possible but yeah maybes not worth it sometimes, would like to see it done though, I'm on looking at fitting cruise control to the landy but its a similar story too awkward to be viable.

 

Nodge68

Well-Known Member

• Oct 28, 2013

• #7

From what I remember, the gear lever still moves the cable to the box when the steptronic is used. Of course the box may well ignore what the cable is doing in that mode but it would need careful checking.