T

tomtomtom

Active Member

• Apr 3, 2013

• #1

Hi all, quick wuestion,

Im looking at fitting an auxiliary fusebox to my 110. It has 6 terminals on it, and I was going to use this for my front spots etc.

Does anyone know where the best place would be to take the 12v supply from to power the fusebox? Does it need to be ignition controlled?

I would rather it was in the engine bay than under the passenger seat?

Tom

 

chezvegas

Active Member

• Apr 3, 2013

• #2

The battery box will be dryer than the engine bay. Ideally the main supply should be on a fused cable
Straight from the battery and if you want to make things live dependant on ignition then use a relay from the cigar lighter. Depends on what you want to wire up to it

 

timtheenchanteruk

Well-Known Member

• Apr 3, 2013

• #3

Ive put 2 in mine, both in the battery box.
one is fed directly from the battery, the other direct from the battery, via an ignition controlled relay, both on fused lines.
not got much in them yet, but they are ready for future use.
If you really want it in the engine bay, use the main live feed from the back of the starter.

 

payydg

Well-Known Member

• Apr 3, 2013

• #4

I used a disco fuse box direct from the battery with a 100amp inline fuse.