2 243dunc New Member Oct 20, 2012 #1 I have managed to mix up the finger followers-. How do I work out which one goes where, as they have numbers on the?
I have managed to mix up the finger followers-. How do I work out which one goes where, as they have numbers on the?
jamesmartin Well-Known Member Oct 20, 2012 #2 they are all the same so wont matter ,things are best left together as surfaces have run in together ,but not essential ,sqeeze each lash adjuster in a vice with a rag over the ends so as not to mark contact surfaces then refit along with followers
they are all the same so wont matter ,things are best left together as surfaces have run in together ,but not essential ,sqeeze each lash adjuster in a vice with a rag over the ends so as not to mark contact surfaces then refit along with followers
2 243dunc New Member Oct 20, 2012 #3 Thanks James! Just one questions, why do they have different numbers on them ie 01 , 08or 18.
jamesmartin Well-Known Member Oct 20, 2012 #6 not sure without seeing them lash adjuster (hydraulic tappet) adjusts gap between valve and cam
2 243dunc New Member Oct 20, 2012 #7 This is a pic of the roller followers Attachments 20121020_202149.jpg 161.5 KB · Views: 475