Sir DD of Cumbria
New Member
Shes the beauty,
My wiring diagram has a White and grey and the black as the feed direct to the motor failing that a red wire with a black strip comes from position 3 of the switch so if there is one of either in the loom they should be full power on the motor if that works I can check the resistor here!
My wiring diagram has a White and grey and the black as the feed direct to the motor failing that a red wire with a black strip comes from position 3 of the switch so if there is one of either in the loom they should be full power on the motor if that works I can check the resistor here!
