ere Grippa
ooze a pweetty boy, then
ooze a pweetty boy, then
Grippa
New Member
Fink so, cun't remember, jest remember thinking it wuz odd they wuz the same on me old'un. I'd have to look & Landy's outside, beer isn't.
jai_landrover
Well-Known Member
Hiya Guys,
First I must say great post on fitting diy breathers, I will be ordering a load soon! But first I need to finnish my snorkel, I have a k&n neatly fitted into a mushroom top, to shield from any rain mud ect, that was the easy bit but finding 3 inch straight pipe is prooving a nightmare, I have flexi but it wont look too neat.
I'm at my wits end trying to find 3 inch straight diameter drain pipe or anything that diameter for a home made snorkel.
Normal drain pipe comes in 2.5"/63mm or 4"/100mm, I really need 3 inch or 75/76mm. I can find some acrillic pipe but I think it may shatter, throwing shards into my precious turbo if it was to get squashed or damaged. Metal was another option but where can I buy lengths of that?? Any ideas??? I would really apreciate it.
Jai, based in Luton, Bedfordshire,
First I must say great post on fitting diy breathers, I will be ordering a load soon! But first I need to finnish my snorkel, I have a k&n neatly fitted into a mushroom top, to shield from any rain mud ect, that was the easy bit but finding 3 inch straight pipe is prooving a nightmare, I have flexi but it wont look too neat.
I'm at my wits end trying to find 3 inch straight diameter drain pipe or anything that diameter for a home made snorkel.
Normal drain pipe comes in 2.5"/63mm or 4"/100mm, I really need 3 inch or 75/76mm. I can find some acrillic pipe but I think it may shatter, throwing shards into my precious turbo if it was to get squashed or damaged. Metal was another option but where can I buy lengths of that?? Any ideas??? I would really apreciate it.
Jai, based in Luton, Bedfordshire,
jai_landrover
Well-Known Member
i would go for 2.5 inch pipe although i have a 3inch snorkel mushroom top and a 3 inch inlet for the tdi turbo its all sealed and mounted quite neatly. I would love to have 3 inch all the way less restriction, easier and alot neater than 3 into 2.5 into 3. Ill try the pond shop next Jai
Pikey
Dummy Ejection Facilitator..
Woulod be better if they was 6mm. But what do yu need a manifold for anyway? all yu need is 3 Tee connectors linked together. gives yu 4 breather connections and an extended pipe to the top of the snorkel
like this?
I just like the idea of a proper fannymold.
I just like the idea of a proper fannymold.
Sirus
Your all Banned except me
Pikey
Dummy Ejection Facilitator..
Tis a proper fannymould. Looks like this when it's done.
Attachments
Trewey
Cockernee, Pasty munchin bastid.
like this?
I just like the idea of a proper fannymold.
yea - cept I dunno wot the top 3 90deg fittings is for?
plus I bought the bits seperately from an engineering supplies place for less that half the price of a "kit"
tiz all floppy
the top 3 are for the timing cover, clutch cover and erm..............:doh:
Trewey
Cockernee, Pasty munchin bastid.
tiz all floppy
ffs, it's tucked behind the heater box - no one can see it.
or are yer talkin bout yer "personal" problem?
Pikey
Dummy Ejection Facilitator..
tiz all floppy
It will be at your age
But if yu keep the connecting pipes short (10mm between em) they'll be fine.
Trewey
Cockernee, Pasty munchin bastid.
I just plug them.
