Daz

Active Member

• Jul 25, 2017

• #1

Afternoon, I've a 1991 200 tdi defender and just fitted a straight through middle exhaust section. Now I want to do away with the rear silencer.
I bought a 300tdi rear piece as I read it would fit straight on but it doesn't.
Different fitment and needs cutting etc to fit
Is there anybody who makes straight through rear pipes for a 200 tdi or is there anyone on here who would be able to make me one please?

 

Oldseadog

Well-Known Member

• Jul 25, 2017

• #2

YDFNL do you want a straight through pipe??

 

Daz

Active Member

• Jul 25, 2017

• #3

Eh?

 

Daz

Active Member

• Jul 25, 2017

• #4

If your asking why I want it, it's because I want it to sound louder .
Yes I know....

 

bankz5152

Well-Known Member

• Jul 25, 2017

• #5

Each to their own. Apart from Side Exits i've not seen any kind of decent quality rear silencer deletes.

 

Daz

Active Member

• Jul 25, 2017

• #6

I know I should have grown out of it but at the Kelmarsh show there were some great sounding Landys.
Do you know any side exit suppliers or are they all home fabricated?

 

lucifus

Active Member

• Aug 15, 2017

• #7

I made my own years back. Just cut out the rear box and replaced with a bolt on straight through. Then on my td5 I cut the back box out and welded in a straight section. My 110 now has a straight through with 4" side exit. I welded it myself. Sounds awesome! Where are you located?

 

lucifus

Active Member

• Aug 15, 2017

• #8

 

lucifus

Active Member

• Aug 15, 2017

• #9

td5 one - Bit that I cut out, bit that I welded in and the exhaust back on the car. Simples.

My 200tdi sounds awesome. The td5 sounded awesome also and a bit louder. I'm an amateur welder with a basic mig. Any garage should be able to fabricate something fairly simple if you just want a box cut out and replaced with a straight through.

 

Foxyred

Well-Known Member

• Aug 15, 2017

• #10

I used ESR4527 on my 90