Co-Pang-Yang
Well-Known Member
I know right, Scania Nom!
666 george
Well-Known Member
Even the cash machine's got a stiffie!
livers
Well-Known Member
and a red arrows flypastSeen this this morning:
Want it soo bad!!
danchapman2k2
Well-Known Member
Landy forsale chaps let me know if interested
Co-Pang-Yang
Well-Known Member
Well I'll be down the barn from 9 onwards, all are welcome. weathers ment to be good so bring a drink lol.
Last edited:
danchapman2k2
Well-Known Member
Landy sold and collected tomorrow so chaps what do I need to look out for in discovery world? Pal so will a standard one be ok green Laning or would I need bigger tyres Etc etc?
Co-Pang-Yang
Well-Known Member
Well took a new prob, stub axle and wheel bearings but my truck is mobile again and ready for Essex Off Road tomorrow
danchapman2k2
Well-Known Member
Look forward to the pictures
Discodad
Well-Known Member
Rust. Rust. Rust.
Very good all rounders but bigger wheels and a lift make a big difference.
Discodad
Well-Known Member
Well took a new prob, stub axle and wheel bearings but my truck is mobile again and ready for Essex Off Road tomorrow
Well done, wasn't too bad then.
I've got oil running down both sides of the tyre? And it doesn't sound / feel like a wheel bearing
danchapman2k2
Well-Known Member
Thanks disco dad I shall borrow some experienced disco eyes when I find one I like
matthew2riches
New Member
Well done, wasn't too bad then.
I've got oil running down both sides of the tyre? And it doesn't sound / feel like a wheel bearing
That'll be your seals
Nice and easy - give you something to do. A little bit of bonding time to rekindle your love
Drizz
Well-Known Member
Well finally sorted my suspension issues. Turns out one bag had a pinprick hole in it and wasnt leaking till it was under load such as round a roundabout hence why it was randomly going down. One new airbag and alls good!.......... for now!
Now it needs a good wash and de-siliconing inside as everything feels wet! Yuk. Also want to remove the winch bumper, steering guard, and ATs and replace with an OE bumper, if i can find one for less than £500, and get some wider modulars or 18s-20s when funds allow....
Before:
After:
Now it needs a good wash and de-siliconing inside as everything feels wet! Yuk. Also want to remove the winch bumper, steering guard, and ATs and replace with an OE bumper, if i can find one for less than £500, and get some wider modulars or 18s-20s when funds allow....
Before:
After:
danchapman2k2
Well-Known Member
If I get my disco I may be interested in the bumper mate. As for the advise and help I'm sure I will shout when I need some lol
Co-Pang-Yang
Well-Known Member
Time to design a new bumper then
matthew2riches
New Member
How's life with the TD5 Drizz? I like mine
