:whoosh:
200tdi ayre
Well-Known Member
Don't skimp on grease, grease is cheap metal isn't, get some good lithium stuff we sell Morris which is good but whatever your local supplier has get good stuff 
Don't skimp on grease, grease is cheap metal isn't, get some good lithium stuff we sell Morris which is good but whatever your local supplier has get good stuff
Thats what i mean.
What do i get? lol. whats morris?
Im still non the wiser! :lol:
200tdi ayre
Well-Known Member
Haha Morris oils is a brand that we sell all different oils, greases ect premium blue is what we recommend for things that get hot as it keeps its viscosity at temperature and stays stable
K323 Premium Blue Grease
Something like this will do you fine
premium blue is what we recommend for things that get hot as it keeps its viscosity at temperature and stays stable K323 Premium Blue Grease
Something like this will do you fine
depends what you want. But get a good grease that is water resistance. Them cheap grease easily mixes with water. High quality grease is worth there weight in gold ie less spent on replacement parts and time spent doing repairs. This uj issue which is a on going story. buy high quality UJ's with a grease nipple, grease before you go off roading,wading then grease again after your done to flush the **** out. Got 190k on my truck and still on original uj's they have grease nipples.
Do people really think they are getting ripped off on 6 quid UJ over a 12-14 quid GKN uj
when the higher priced one will last 3-4 times longer if they would just grease the damn things
Do people really think they are getting ripped off on 6 quid UJ over a 12-14 quid GKN uj
when the higher priced one will last 3-4 times longer if they would just grease the damn things
why????????????? just use tube grease lot easier to use and less mess and waste.
tubes like this BGB
Amazon.com: Northern Industrial 14-Oz. Multipurpose Lithium Grease - 10-pk.: Home Improvement
Andy Land
Well-Known Member
I have a tub of copper grease with a paint brush in which I use to coat any nuts and bolts I use on various jobs. This is also useful for brake springs and moving parts within the brake housing ... apart from the obvious! :fish:
Also have a tub of lithium grease for bearings.
I got a double tub pack off the bay pretty cheap as per this link:
2 x GREASE 500gm TIN 1 x Lithium LM High Melting Point + 1 x Copper Grease | eBay
You can also get a copy of Grease the musical if you're that way inclined!
Also have a tub of lithium grease for bearings.
I got a double tub pack off the bay pretty cheap as per this link:
2 x GREASE 500gm TIN 1 x Lithium LM High Melting Point + 1 x Copper Grease | eBay
You can also get a copy of Grease the musical if you're that way inclined!
200tdi ayre
Well-Known Member
The ammount of fares we have come in and say they just want a UJ but then we inpect the yolk and its twiste and they end up having to have a new shaft is silly, if they just greased them they would cause far less damage and reduce overall cost! Although it does mean I've got a UJ swap down to less than 30 mins now
The ammount of fares we have come in and say they just want a UJ but then we inpect the yolk and its twiste and they end up having to have a new shaft is silly, if they just greased them they would cause far less damage and reduce overall cost! Although it does mean I've got a UJ swap down to less than 30 mins now
And cheap as possible
jamesmartin
Well-Known Member
any std grease cartridge will do from motor factors
Cheers ears.
Have gone ahead and ordered the ebay special.
Nice one Andy.
Got a noo grease gun from my old man today, it dosen appear to have the capability to instal a cartridge though, you have to fill it by hand.
you will love the cartridges better less mess and wasted grease. And quicker reload time
warrior
Well-Known Member
I use this on my props red 'n' tacky
http://www.lucasoil.com/products/display_products.sd?catid=14&iid=46&loc=show
http://www.lucasoil.com/products/display_products.sd?catid=14&iid=46&loc=show
