Rollo Tomasi
Active Member
Evening all,
Just fitted Electric Seats to my RR, all went well until I tried them.
Passenger side works fine, but the Drivers side nothing. I've checked the wiring all seems ok, It's got power to two or three of the pins on the gray plug that goes to the ECU/Outstation. I've even changed the ECU/Outstation & Switch pack for known good units & still nothing.
Yes it has a Highline BeCM & the correct loom.
Have I missed something that you more knowledgeable folk might know of & be able to point me in the right direction.
Cheers in advance.
Oh!, it's a 96 DSE Auto, if that makes a difference.
Just fitted Electric Seats to my RR, all went well until I tried them.
Passenger side works fine, but the Drivers side nothing. I've checked the wiring all seems ok, It's got power to two or three of the pins on the gray plug that goes to the ECU/Outstation. I've even changed the ECU/Outstation & Switch pack for known good units & still nothing.
Yes it has a Highline BeCM & the correct loom.
Have I missed something that you more knowledgeable folk might know of & be able to point me in the right direction.
Cheers in advance.
Oh!, it's a 96 DSE Auto, if that makes a difference.
Last edited: