awillemsen said:

Problem fixed

Squirted a bit of WD40 into drivers door key hole. Exercised key in lock for a bit. Never entered EKA, but key then synced and engine started!

Click to expand...

awillemsen said:

Thanks for the replies - much appreciated.



Done this - fob light does not flash when key is turned to position 1.



Bonnet is, I think, sorted. I've had the latch and switch out, and tested the switch - circuit is closed when the button on the switch is not pressed, and open when it is pressed. In other words, just connecting the switch to the multiplug closes the circuit. So, I tried with the switch connected (but not in the latch). I also tried with the pins on the multiplug bridged to close the circuit manually. Neither worked. Greased the latch and reassembled - still no joy. Is there any other way to tell if the switch is registering open or closed?

Click to expand...