cfdave said:

Hi all,

Not another question about this i bet you're all saying. I know how to do them ive read alot on here, Just want to check to things out with all of you. Once i've removed the egr what do i need to do with the wiring to the valve and the second (might sound stupid ) what happens reguards the mot will i have to do anything or just put her through with these mods.
Cheers Dave

Click to expand...

cfdave said:

Cheers for that as for decatting i was just going to cut the cat out and weld in some tube instead as thats all id be paying for isn't it
Dave

Click to expand...

markw said:

hi dfdave

i've not long blanked my egr valve, i just taped the wire and pipe and tucked it by the air filter box. not de-catted yet but its on my list.

the difference in blanking the egr valve was noticable, especially being an auto.

as for the mot, i will let you know.

replacing the boot floor at the minute and few other jobs ready for mot in
few weeks time.

i'm like your self a newbey to discoverys, but there are loads of guys on here with lots of knowledge and tips to help you do almost every thing.

all you need to do is ask

cheers mark

Click to expand...

markw said:

hi dave,

yes i put a 2"long bolt in the pipe, put a few cable ties around then taped it as per the advise at the time.

if i remember i did ask about that at the time, but not too sure.

cheers mark

Click to expand...

markw said:

no problem,

i would you or others point these silly little things out

at least then this avoids problems later

cheers mark

Click to expand...