gazdav

New Member

• Feb 28, 2013

• #1

Ok what I have here is a problem.

Symptoms are.

The imobaliser will not turn off.
both two button fobs broadcast but it will not unlock the landy. Checked on a key programmer.
The system will not accept reprogramming the fobs.
The EAK coda works but has to be put in every time the door is locked

As this is an 300tdi auto with EDC their is no spider to bypass so that is not an option.

So the question is do I need a new ECU for the EDC.

 

gazdav

New Member

• Feb 28, 2013

• #2

Bump arrrrrrrrrrrggggggggghhhhhhh it's ****ing me off

 

thebiglad

Well-Known Member

• Feb 28, 2013

• #3

My guess would be that you have a problem with the fob radio receiver in the car.If that doesn't function it can't tell the ECU to cancel the immobiliser or operate the remote central locking.

 

gazdav

New Member

• Feb 28, 2013

• #4

I was thinking that to.

It's the green control box on in the passengers footwell
As that has failed before and has been replaced.
The plot thickens

 

E

eightinavee

Well-Known Member

• Feb 28, 2013

• #5

gazdav said:

I was thinking that to.

It's the green control box on in the passengers footwell
As that has failed before and has been replaced.
The plot thickens

Click to expand...

Your car has no separate RF receiver like P38's or DII's, as you say the signal goes straight into the alarm ecu.This will be where your problem is,it may be worth trying to recode the fobs to it via Testbook.(The security link twixt the Alarm ecu and EDC ecu also needs to be relearnt at the same time)
I would also be looking for water ingress and checking all the feeds and earths to the alarm ecu.

 

D

Diablo user

New Member

• Mar 1, 2013

• #6

Same happened to me last weekend so could only start with the EKA code I bought and new EDC ECU of eBay ( make sure you get ECU and fob ) cost me £30 buy it now arrived yesterday 5 min job all working now ( sounds daft but make sure you get one for the car 300tdi , auto )

 

gazdav

New Member

• Mar 1, 2013

• #7

Well £40 for a EDC ECU 2 fobs and the EAK coda from the local beakers job done all working happily now.

 

SpaceDawg

Active Member

• Mar 2, 2013

• #8

Sounds like I need to add that to me spares list!

 

m900uk

Member

• Dec 4, 2013

• #9

I get this problem, fobs work when they please. when they fail, just leave it a while or maybe a day and randomly it all starts working again.

So EDC and ECU can just be replaced together and that will sort? (hopefully)

 

thebiglad

Well-Known Member

• Dec 5, 2013

• #10

m900uk said:

I get this problem, fobs work when they please. when they fail, just leave it a while or maybe a day and randomly it all starts working again.

So EDC and ECU can just be replaced together and that will sort? (hopefully)

Click to expand...

EDC stands for Electronic Diesel Control and this system is managed/controlled by the engine ECU.

EDC is not a component in itself it's a marketing name for the system of control.


Dave