Dear All,

I am in the middle of a complete rewiring project, I preferred to rewired the whole car rather than fix the 35 years old wiring.

I would like to use as much as possible DT connectors, but I would like to know how to do the followings:

1. let say I have one positive feed for example for the rear lights that I need to connect to two wires on the other side. how do you do it? for example I come from the fuse panel with one wire for the rear lights and need to connect two wires on the other side (left and right)?
2. what is the maximum gauge or mm2 for each wires in the DT connectors? can I run multiple 2,5mm2 into one plug with let say, 6 pins?

Thank you all for your help.

Don't know what a DT cobnnector is I use Lucas connectors on my 1994 300tdi.
A 2 from 1 is easy ...


To goto the other side it is connected in the rear coner of the tub and run down. across the rear X-member and up into the other corner ...