Datatek

Well-Known Member

• Dec 13, 2012

• #1

Anyone taken all the boxes out of the N/S rear? The TV module is easy enough, but the black box which seems to be the DSP has a bolt that is inaccessible, even the frame it mounts too seems to have bolts that are not easily got at

 

M

marcinbrighton

New Member

• Dec 13, 2012

• #2

not yet - but about to, to lend my dsp to sas1810. let us know how that works out....

Not sure if I've got a TV module on mine though?

 

RS2000CUSTOM

Active Member

• Dec 13, 2012

• #3

Datatek said:

the DSP has a bolt that is inaccessible, even the frame it mounts too seems to have bolts that are not easily got at

Click to expand...

You have to remove the body to get at it !

 

Datatek

Well-Known Member

• Dec 14, 2012

• #4

RS2000CUSTOM said:

You have to remove the body to get at it !

Click to expand...

It sure looks that way, then use a gas axe to cut a hole in the bottom of the body shell

 

Datatek

Well-Known Member

• Dec 15, 2012

• #5

So it seems nobody has managed this, I'll post up again when it been removed with details of the size of hammer needed.

 

dogsbody

Very senior member

• Dec 15, 2012

• #6

Datatek said:

So it seems nobody has managed this, I'll post up again when it been removed with details of the size of hammer needed.

Click to expand...

You should be asking the breakers. Try Andy at Rangeroverbreakers, he's usually working on a Saturday, outside the cricket season !! An email might be your best bet.