IamRobbie

Well-Known Member

• Sep 11, 2014

• #1

Ok so I've got a couple salisbury for my 90. One has a broken diff and the other has a shabby casing. I don't fancy swapping the diffs so is it possible to swap the whole drum off the end of the axle?

 

E

ebbadger

Well-Known Member

• Sep 11, 2014

• #2

yes look behind the drum and the hub to axle case nuts will be obvious... 6 if i remember correctly, strip it all down n do the seals / bearings etc whilst your at it. swopped mine for HT bzp so they wont rust in place again.... will post pic later if u need it but i cant access flickr on the work system

Cheers Steve

 

Last edited: Sep 11, 2014

IamRobbie

Well-Known Member

• Sep 11, 2014

• #3

I noticed the nuts on the back I was worried about the seals ect. I need to find the part numbers for all the bits. I might stick the axle on the defender for the time being and strip it down another day.

 

E

ebbadger

Well-Known Member

• Sep 11, 2014

• #4

doesn't take long and its a nause if an old seal fails after getting it all back together

2 by The_Wild_Boar, on Flickr

6 by The_Wild_Boar, on Flickr

did mine in slow time n prob took 2 easy days to renew all seals, all bolts, brake cylinders, shoes n pipes after painting it, basic tools n a bit of time and it'll be as good as new...

brakepipe_os_rear by The_Wild_Boar, on Flickr

IMG_1936 by The_Wild_Boar, on Flickr

cheers steve