F

Frank_38

Active Member
Good evening everyone,

For the last 3 weeks I have had the problem that when I press the button to open the car, all the doors open - except the driver's door.
The key works, the handle works and pulling up the pin manually also works.

There is a loud whirring noise - from the motor in the door - both when opening and closing the door with the remote control. I have taken a photo - maybe someone will recognise something.

So - the motor comes on but does not push the pin up or down. What could it be?

Thanks!!!
 

Attachments

  • 1.jpg
    1.jpg
    117.2 KB · Views: 10
Frank_38 said:
Good evening everyone,

For the last 3 weeks I have had the problem that when I press the button to open the car, all the doors open - except the driver's door.
The key works, the handle works and pulling up the pin manually also works.

There is a loud whirring noise - from the motor in the door - both when opening and closing the door with the remote control. I have taken a photo - maybe someone will recognise something.

So - the motor comes on but does not push the pin up or down. What could it be?

Thanks!!!
Click to expand...
Link off or the gears have failed.
 
...yes, it sounds like the gears are defective.
is this a unit that needs to be replaced?
the motor seems to be riveted?
How do I get it replaced? Thanks!!
 
ohhh,
the whole only exists as a unit!
Very expensive!
Can it be removed and repaired? Has anyone ever done it?

ALR6955
FQJ103250

Thanks!
 
Frank_38 said:
ohhh,
the whole only exists as a unit!
Very expensive!
Can it be removed and repaired? Has anyone ever done it?

ALR6955
FQJ103250

Thanks!
Click to expand...
Do a search, I think certain MGF lock assemblies are the same as the P38 but much cheaper. I would certainly take the lock assembly out, dismantle it and check what is wrong. It may be repairable
 
If the motor runs, but doesn't unlock there's probably stripped gears inside. Most P38 latches suffer failing microswitches, but the motors do fail - mainly the brushes.

I have repaired some of mine. There's about 6 or 7 screws holding it all together. The motor is inside the plastic housing & unclips from the gears. The lock-unlock motors are identical in all four doors, but the gears are different. Front passenger doors only have 2 microswitches, but drivers doors have 3.

If you want to refurb it, get several spare P38 latches & start learning how to dismantle & re-assemble one. Then pick the best of the bits & make a good latch.
 
You must log in or register to reply here.

Similar threads

Maat
P38A Driver's door lock issues
Replies
12
Views
1K
Datatek
Datatek
O
Front passenger door on Freelander 2 won’t open
Replies
4
Views
1K
Arctic2
Arctic2
J
Discovery Sport Boot / tailgate
Replies
13
Views
2K
discool
discool
DollyBird
Engine disabled, keys not working, tried the guide “Re-synching the Range Rover P38 diesel engine with the Solved - BECM using a Nanocom” no luck
Replies
9
Views
2K
DollyBird
DollyBird
kurgan
Disco 1 Driver door lock and central locking issues.
Replies
8
Views
2K
kurgan
kurgan