nobber

nobber

Well-Known Member
ive replaced the driving members and prop but ive still got play.
anything on the tranny box end that might be worn?
 
slack , it kangaroo's in slow traffic and clonks when putting power down on the throttle and taking power off.
 
isnt their an input and output bearing on the trany box? what about halfshaft Cv joint wear? clonk could be coming from the axles... just a thought
 
its hard to pin down a clonk in the drive train.
is there flanges on the tranny box the same way there is flanges on the diffs?
 
not really , it sounds like its coming from the tranny box end but you cant really tell by sound as it travells through the whole drive train.
the drive members on my front axle were really badly worn , to the point of nearly sheering so there is a fair chance it could be the flange on the front diff as this would wear out with the drive members , wouldnt it?
 
If you remove each prop in turn and go for a drive you'll be able to work out where it's coming from.
 
You must log in or register to reply here.

Similar threads

J
TD5 defender Vibration
Replies
3
Views
900
chrisstdt
chrisstdt
stumpyj
TD5 Fuel line to fuel pump clip
Replies
10
Views
2K
Alan Henry Crossley
A
julianf
Loads of slack in power train - diffs?
Replies
15
Views
1K
julianf
julianf
Zakmyster
fuel/inertia switch/starting issue
2
Replies
22
Views
2K
sierrafery
sierrafery
R
Ex military 90 soft top 1994 - 300TDi conversion
Replies
7
Views
677
ChristopherDailey
C