haigy
Well-Known Member
I fitted a nrecon steering box the other week and a power steerinv pump and new drag links at the same time. I refitted the drag links and passanger side has stayed tight with pin in.
Drivers side which goes thru the drop arm was making a noise and upon inspection the pin is in place but the nut was loose.really loose. But when i tightened them up inrechecked after a test run but 2 week later it loose.
Am i best off doin another drag link
Drivers side which goes thru the drop arm was making a noise and upon inspection the pin is in place but the nut was loose.really loose. But when i tightened them up inrechecked after a test run but 2 week later it loose.
Am i best off doin another drag link
