bluehaze

Well-Known Member
Looking to replace the front and second row door seals. Whilst I'd prefer genuine LR they seem very expensive compared to other brands.

Any thoughts or suggestions?
 
Looking to replace the front and second row door seals. Whilst I'd prefer genuine LR they seem very expensive compared to other brands.

Any thoughts or suggestions?
ive just fitted a britpart front door set and they were surprisingly good ,better than previous ive bought
 
I fitted britpart to the front and 2nd row doors on my 110sw.
Fronts have been trouble free but the 2nd row ones were crap, I can't remember the exact issue because it was so long ago. I think the seal deformed where the lock side flange goes all bendy on the waistline, know where I mean?
Anyway, they leaked terribly in that area. Fitted genuine and they were perfect but, like you say, pricey.
Britpart might have improved them by now though?maybe buy just 1 and try it?
 
I replaced both of the front door seals on my 90 300 TDI Station Wagon - all was well with one seal but the other had splits in it in a number of places. The supplier provided another but that was just the same so the only alternative was to buy a genuine LR one which I seem to recall was about £50! I would advise that you check the seal carefully because if you find one split you will find ten more.
 
I've recently replaced all three on my Defender 90 with Bearmach ones. Not road tested yet, just stood on drive. However, I was surprised by the quality. Bought them from Paddocks they were £14.34 each for the front ones. The rear one was £10.50
 
I brought bearmach ones, they fitted fine. Had to fettle a bit to get a decent seal round the waistline bit of the door aperture but otherwise fine
 

Similar threads