Shrivaldo

New Member

• Apr 14, 2024

• #1

Hello all
Can anyone give me guidance on getting my doors to fit properly please? Drivers and passengers stick out at the bottom.

 

Attachments

• 
  IMG_6585.jpeg

  378.3 KB · Views: 158
• 
  IMG_6579.jpeg

  443.7 KB · Views: 143
• 
  IMG_6578.jpeg

  305.6 KB · Views: 157

tottot

Well-Known Member

• Apr 14, 2024

• #2

HA, Its a Land Rover. There is/was a video of the last one coming off the production line. Interview's with the suits going on. In the background a worker is giving it the final checks and can be seen giving the door a heave ho to get it right.
Try moving latch in some, may help but door may be difficult to shut.

 

A

Anaconda

Well-Known Member

• Apr 14, 2024

• #3

Certainly looks a little out of shape.

 

H

Hicap phill

Well-Known Member

• Apr 14, 2024

• #4

Did you use any shims under the hinges ?

 

Shrivaldo

New Member

• Apr 14, 2024

• #5

Hicap phill said:

Did you use any shims under the hinges ?

Click to expand...

Hi thanks for the reply, I haven’t had any hinges off yet. My first defender so not sure what I’m doing

 

H

Hicap phill

Well-Known Member

• Apr 14, 2024

• #6

Shrivaldo said:

Hi thanks for the reply, I haven’t had any hinges off yet. My first defender so not sure what I’m doing

Click to expand...

If you are able to remove the top hinge(either bolts on door or bulkhead which ever is easier) then get the door striker in a bit. See if the bottom goes in & the top stops in line. Then this shows you need a shim/adjustment on that hinge

Happy spannering

 

Shrivaldo

New Member

• Apr 14, 2024

• #7

Hicap phill said:

If you are able to remove the top hinge(either bolts on door or bulkhead which ever is easier) then get the door striker in a bit. See if the bottom goes in & the top stops in line. Then this shows you need a shim/adjustment on that hinge

Happy spannering

Click to expand...

Ok I’ll try that. Thanks