leg oot the bed
Active Member
as title suggests really, thanks in advance
leg oot the bed
Active Member
thats what i thought really, mk1 fiesta bumper might not be up to the job though lol
jai_landrover
Well-Known Member
more approach angle gained as its closer to the rad panel by a few inches
johnny curt 1
Well-Known Member
yeah itll fit with next to no modifications near on any bumper yer can get for a fender will fit a series even most of the winch bumpers 
leg oot the bed
Active Member
its a 200tdi anyway so starting handle not an issue its winch bumpers ive been looking at
TheKeymeister
Active Member
My mate did the opposite so would suggest yes
Rob Anybody
One Loaf. Sliced
I fitted a military 90 front bumber, the one with the central towing point, to my SIII with a small mod to the bumber.
Using a 4" grinder I cut 2 short slots either side of each mounting bracket on the underside of the bumber to allow the front spring hangers to slot into. Other than that nothing else was required.
Using a 4" grinder I cut 2 short slots either side of each mounting bracket on the underside of the bumber to allow the front spring hangers to slot into. Other than that nothing else was required.
