Djdommyp
Active Member
Hello all,
Brought my first series land rover yesterday and it's going to need some work so why not start a thread to track progress......
About the car :
1980 series 3, 2.25 petrol van, fairly standard, had discovery steels and old remold tyres.
Brought it from surrey and live in Hertfordshire so only 45 miles..... Easy right ?! ..... 4 hours and 35 litres of fuel later and I'm home, tired and fed up
After a bit of fettling today with stutab have found the culprit and it is ....
So Saturdays job it to install a newer cleaner filter and check carb and pump for any unwanted metal.
Probable cause for this is the car has done 300 miles in the last 2 years so has been stood up unused for quite some time.
THE PLAN :
My intentions going forward are to strip the lovely lime green paintwork back and repainted the whole land rover. Weld any holes etc, new wheels and tyres and maybe a few shiny bits too.
The main use will be for trailing with my local land rover club along with killajoules, stutab and Jai
Brought my first series land rover yesterday and it's going to need some work so why not start a thread to track progress......
About the car :
1980 series 3, 2.25 petrol van, fairly standard, had discovery steels and old remold tyres.

Brought it from surrey and live in Hertfordshire so only 45 miles..... Easy right ?! ..... 4 hours and 35 litres of fuel later and I'm home, tired and fed up
After a bit of fettling today with stutab have found the culprit and it is ....

So Saturdays job it to install a newer cleaner filter and check carb and pump for any unwanted metal.
Probable cause for this is the car has done 300 miles in the last 2 years so has been stood up unused for quite some time.
THE PLAN :
My intentions going forward are to strip the lovely lime green paintwork back and repainted the whole land rover. Weld any holes etc, new wheels and tyres and maybe a few shiny bits too.
The main use will be for trailing with my local land rover club along with killajoules, stutab and Jai