wiltshire landyman
I’m back
:crazy:why why why why why why? would u wanna put some gay caps on your nuts:crazy:
Ghost
New Member
There's the added bonus of not being able to see if your nuts have loosened and the wheel is about to fall off?
same reason you're happy to pay for 2 doors to be resprayed, jus cos you wanted the stickers off.
It's for stress relief, every time I'm stressed with the repairs I stick another plastic cap on, done six up to now, todays was because I cant get the bolts that hold me calipers on undone.
They're on the axle I took off and I've tried heat and a long bar on a socket and bashing the socket whilst pressure is applied.
I've tried a cold spray stuff ta freeze the bastards whilst I try and shock em loose.
I'm now officially fed up and leavin em till Monday
They're on the axle I took off and I've tried heat and a long bar on a socket and bashing the socket whilst pressure is applied.
I've tried a cold spray stuff ta freeze the bastards whilst I try and shock em loose.
I'm now officially fed up and leavin em till Monday
Ta mate,see...
told you you wanna buy mine
If you want to mate ive got a complete axle you can have any bits off them.
So can anyone else for that matter.
I have a set of calipers off the axle I bought but the pistons are corroded. The calipers on the axle I took off are Ok but I cant get em off to swap em to me new axle :doh:
If you have two good calipers for solid discs and the pistons are shiney then I might be able to afford them if they are not tooooooo expensive
it may be cheaper to buy new pistons an seals for these though
can you deliver
tell you what ill swap u 4 a V8.
I could prolly arrange delivery at cost though, ill go speak to that wonderful royal mail stuff
Cost about a tenner with parcelforce.
I'm gonna have a go with the grinder on Monday and see how it goes.
had to give up today , I was wiring a new security lamp on the garage and when I came to strip the wires back there was a blue flash and a bang and I dropped the soddin strippers
anyway, the qualified electrician who installed it wired the bloody switch in upside down so on was off and off was jeeeeesus me bloody thumbs on fire.
Didn't fall off the ladder though
and the light works
