P

plastic soul

Active Member

• Jan 24, 2012

• #1

Wheel nuts on the alloys, are they covers? Do a put a wheel brace straight on these? Is there a nut in the middle also? If so how do you get the cap off?
Cheers

 

The Mad Hat Man

Well-Known Member

LZIR Despatch Agent

• Jan 24, 2012

• #2

not covers - whell brace goes straight on.

 

P

plastic soul

Active Member

• Jan 24, 2012

• #3

cheers thanks

 

discool

Well-Known Member

• Jan 24, 2012

• #4

You locking wheel nut will have a cover the one with the dimple (if u have them that is) that cover will have to be removed first.

 

T

Tony S

Active Member

• Jan 24, 2012

• #5

Check to see if one on each wheel has a dint in the middle if so that ones a cap which will pull off to reveal a locking wheel nut.

 

T

Tony S

Active Member

• Jan 24, 2012

• #6

Ha you beat me to it discool

 

sidewaysste

Active Member

• Jan 24, 2012

• #7

What's also worth mentioning is that they're ****e. They corrode and then the socket doesn't fit on. That and you can't use a double hex socket because it'll chew the nuts up. And no one likes chewed nuts. Black mark Landrover!